Introduction, 1 models and features, 1 introduction – Novatel GNSS Receiver and Antenna SMART-AG User Manual

Page 18: Smart-ag receiver, Chapter 1 introduction

Advertising
background image

18

SMART-AG User Manual Rev 5

Chapter 1

Introduction

The SMART-AG is a high-performance GNSS receiver and antenna, capable of receiving and
tracking different combinations of GPS L1 and GLONASS L1 code and carrier signals on a maximum
of 36 channels. SBAS (Satellite Based Augmentation Systems) includes WAAS, EGNOS, and MSAS.
SBAS support is standard. Refer to the GNSS Book, available from our Web site at

www.novatel.com/

support/knowledge-and-learning/

, for an overview of each of the above signal types. The SMART-AG

rear panel also features light emitting diodes (LEDs) for status indication.

Once properly powered, the SMART-AG begins operating as a fully functional GNSS system. Figure
1
below shows the SMART-AG without connecting cables.

Figure 1: SMART-AG Receiver

1.1

Models and Features

The main features of the SMART-AG are:

an enhanced high performance GPS+GLONASS L1 receiver

a high performance GPS+GLONASS L1 antenna

emulated radar output

a CAN port

two (2) RS-232 COM ports

three (3) LED status indicators

a water and dust tight enclosure

Bluetooth wireless technology (optional)

tilt compensation (optional)

Advertising