Network Technologies 900GV - Manual (Page 30)

How to Install the Module
2-10 Installing the DIGITAL VNswitch 900GV
Task 6: Connect the Duplex SC Cables
The DIGITAL VNswitch 900GV uses both Single-Mode Fiber (SMF) and Multi-
Mode Fiber (MMF) port connectors.
WARNING
Some fiber optic equipment can emit laser or infrared light that can injure your
eyes. Never look into an optical fiber or connector port. Always assume the cable
is connected to a light source.
Table 2-3 and Table 2-4 describe supported Short Wave Length and Long Wave
Length cable distances.
Table 2-3: Short Wave Length - Black (HP 5601 - 850)
Table 2-4: Long Wave Length - Blue (HP 5611 - 1300)
Fiber Size Fiber Bandwidth Distance
62.5 Microns (MMF): 160MHz per Kilometer 2 to 220 Meters
200MHz per Kilometer 2 to 275 Meters
50.0 Microns (MMF) 400MHz per Kilometer 2 to 250 Meters
Fiber Size Fiber Bandwidth Distance
62.5 Microns (MMF) 500MHz per Kilometer 2 to 550 Meters*
50.0 Microns (MMF) 400MHz per Kilometer 2 to 550 Meters*
10.0 Microns (SMF) 2 to 5,000 Meters
* requires offset launch fiber jumper
MMF indicates Multi Mode Fiber
SMF indicates Single Mode Fiber