Network Technologies 900GV - Manual (Page 47)

Configuring the Module in a DIGITAL MultiSwitch 900 4-13
[4] Configure IP
[3] Delete SNMP Trap Addresses
This option prompts you to select SNMP trap addresses for deletion from the
community trap address table. If one or more SNMP trap addresses were previously
configured, the screen displays those trap addresses.
The following example shows the dialog associated with this option:
Line Field Description
Configure SNMP Trap
Addresses:
16.20.216.81 This line appears only if the module has been
previously configured.
Trap address [ ] :
16.20.216.81
<Return> Enter the trap address that you have chosen,
then press the Return key.
Enter selection : 3
VNswitch 900GV - slot 3
================================================================
DELETE SNMP TRAP ADDRESSES
Format: The standard 4 octet dotted decimal notation in which each
octet of the address is represented as a decimal value, separated
by a ’.’ character.
example: 16.20.40.156
=================================================================
Configured SNMP Trap Addresses : 16.20.216.81
Trap address [ ] : 16.20.216.81 <Return>
Trap address deleted. Enter a Trap Address [ ] : <Return>
Press Return for IP Configuration Menu...
1
2
1
2