Network Technologies 900GV - Manual (Page 58)

Unseating the Module
5-4 Removing the Cables, Connector and Module
Unseating the Module
To unseat the module from the DIGITAL MultiSwitch 900 chassis (Figure 5-3),
complete the following steps:
Figure 5-3: Unseating the Module
Step Action
1 Lift the release lever (1) at the top of the DIGITAL MultiSwitch 900
slot.
2 While holding up the release lever (2), pivot the module back on its
bottom mounting tab.
3 Lift the module (3) from the backplane.
NPB-0008-95F
3
1
2