Network Technologies 900GV - Manual (Page 56)

Removing the Cables
5-2 Removing the Cables, Connector and Module
Removing the Cables
Before the module is unseated, the LDM cables must be removed from the module. To
remove the cables (Figure 6-1 and Figure 5-1), complete these steps:
Figure 5-1: Removing the LDM Port Cable
Step Action
1 Push in the release tab (1) on the side of the connector.
2 Pull out the cable(s).
NPB-1052-98F
VNswitch 900GV FD DI/E th ern et
1
2