Network Technologies 900GV - Manual (Page 45)

Configuring the Module in a DIGITAL MultiSwitch 900 4-11
[4] Configure IP
[1] Set SNMP Read/Write Community
This option prompts you to enter the module’s read/write community name. The
community name can be used for read/write access control. The read/write community
name is case sensitive. The default is
public .
The following example shows the dialog associated with this option:
================================================================
SET SMNP READ/WRITE COMMUNITY
Format: The format for a community name is a string,
consisting of 4 to 31 printable ASCII characters, that
describes the relationship between an SNMP agent and
one or more SNMP managers. The string defines the
authentication mechanism that is employed to validate
the use of the community by the sending SNMP entity.
================================================================
Enter the community string [public] : <Return>
Press Return for IP Configuration Menu...
VNswitch 900GV - slot 3