NetComm NP3024 - Manual (Page 25)

YML711 Rev1 NetComm 16 or 24 port Gigabit Switch
www.netcomm.com.au 25
Setup Menu
The Setup menu includes four items, including Port Settings, VLAN Settings, Trunk Settings and
Mirror Settings in Setup menu.
Port Settings
In Port Settings (Figure 16), each port’s status is displayed. Press the ID parameter to set each port’s
Speed, Flow Control, QoS priority and Link Status. When you need to renew the posted informa-
tion, click on the “Refresh” button.
The Link Status on the screen will show the connection speed and duplex mode when connected or
will show “Down” to indicated that the port is disconnected.
Figure 16. Port Setting
To change the port setting, click on the ID parameter of the port. The Port Settings window will be
displayed for you to configure the Speed/Disable, Flow control and QoS setting for that Port.
Figure 17. Port Setting parameter