System setting, Trap setting – NetComm NP3024 User Manual

Page 30

background image

NetComm 16 or 24 port Gigabit Switch

YML711 Rev1


System Setting

The System Setting includes the System name, Location name, Login Timeout, IP Address, Subnet
Mask and Gateway. Through the Web Management Utility, you can easily recognize the device by
using the System Name and the Location Name.

The Login Timeout sets the idle time-out for the device. If there is no activity in the Web Smart
Utility, you must re-login to continue.

Insert the IP Address, Subnet Mask and Gateway for the device and click Apply.

Figure 25. System Setting