Using the windows wizard, Procedure – NetComm Fast Ethernet Mini Print Server NP3640 User Manual

Page 7

background image

Rev. 1 - YML656

NP3640 Fast Ethernet Mini Print Server

Page 7

Using the Windows Wizard

The Windows-based Wizard is supplied on the CD-ROM, and runs on Windows 95, 98, NT4.0,
ME, Windows 2000 and Windows XP.

Using this Wizard is the recommended method to configure the Print Server. It can be used
configure the Print Server for your Network environment, even if the Print Server does not have
a valid IP address.


1. Insert the supplied CD-ROM into your drive. If the setup program does not start

automatically, run SETUP.exe in the root folder.

2. On the first screen, shown below, click Setup Wizard.

3. Click Next on the first screen of the Wizard, to view a list of Print Servers on your LAN.

4. Select your new Print Server , then click Next to continue.