NetComm NP2500 - Manual (Page 17)

NP2500 24-Port 10/100 PoE + 2-Port 10/100/1000 WebSMART Switch User Guide 17
YML842 Rev1
CONFIGURATION
Through the Web browser you can configure Switch functions such as VLAN, Trunking, and QoS… etc.
With the attached Web Management Utility, you can easily discover all the Web Management Switches, as-
sign the IP Address, changing the password, and upgrade new firmware.
Installing the Web Management Utility
The following instructions guide you through the installation of the Web Management utility.
1. Insert the Utility CD in the CD-ROM Drive.
2. The following screen will automatically appear.
If this screen does not appear, go to the Start menu on the Windows desktop and choose Run. In the
Run dialog box, type D:\Web Management Utility\setup.exe (D:\ depends where your CD-ROM drive is
located) and click OK.
3. Click on the Install Web Utility button.
4. Follow the on-screen instructions to install the utility.
5. Upon completion, go to Program Files -> web_management_utility and execute the Web Management
utility. (Figure 8.)