Configuring setup setting, Port settings – NetComm NP2500 User Manual
Page 25
Advertising
NP2500 24-Port 10/100 PoE + 2-Port 10/100/1000 WebSMART Switch User Guide
25
YML842 Rev1
Configuring Setup Setting
in Setup menu.
Port Settings
In the Port Settings menu (Figure 18), this page will display each port’s status. Press the ID parameter to set
each port’s Speed, Flow Control, QoS and Link Status. When you need to renew the posted information, press
the “Refresh” button.
The Link Status in the screen will display the connection speed and duplex mode; otherwise this dialog box
will display down when the port is disconnected.
Figure 18. Port Configuration
To change the port setting, click on the ID parameter to enter the selected port to configure its Speed/Disable
and Flow control.
Figure 19. Port Settings.
Advertising