NetComm NP2500 - Manual (Page 30)

30 NP2500 24-Port 10/100 PoE + 2-Port 10/100/1000 WebSMART Switch User Guide
YML842 Rev1
PoE Setting
including, Port Enable, Power limit, Power (W), Voltage(V), Current (mA), Classification, Port status, System
Budget Power, Support Total Power, Remainder Power and The ratio of system power supply.
Note: The PoE Status information of Power current, Power Voltage and Current are exist power
usage information of connected PD, please “Refresh” to renew information.
Figure 25. PoE Status
POE Port Status: Selected “POE Port Status” to configure the PoE Port setting.
To configure the settings, press click on the ID parameter to enter to the
selected port.