Trunk setting – NetComm NP2500 User Manual

Page 28

background image


NP2500 24-Port 10/100 PoE + 2-Port 10/100/1000 WebSMART Switch User Guide

YML842 Rev1

Trunk Setting

There are four Trunking groups to be set; and there are default ports in each member. Checked “Enable” to
use the trunk function, select the ports in each member to be trunk, and click “Apply” to activate the selected
trunk group.

Figure 23. Trunk Settings

Be sure that the selected trunk setting port must connect to the device with a same VLAN group.