NetComm NP2500 - Manual (Page 9)

NP2500 24-Port 10/100 PoE + 2-Port 10/100/1000 WebSMART Switch User Guide 9
YML842 Rev1
Installing the Switch on a Desktop
attached. Attach these cushioning feet on the bottom at each corner of the device. Allow enough ventilation
space between the Switch and any other objects in the vicinity.
Figure 1. Installed on a Desktop
Installing the Switch on a Rack
The Switch can be mounted in an EIA standard-size, 19-inch rack, which can be placed in a wiring closet
with other equipment. Attach the mounting brackets at the Switch’s front panel (one on each side), and
secure them with the provided screws.
Figure 2. Combine the Switch with the provided screws.
Then, use screws provided with the equipment rack to mount each switch in the rack.