NetComm NP2500 - Manual (Page 36)

36 NP2500 24-Port 10/100 PoE + 2-Port 10/100/1000 WebSMART Switch User Guide
YML842 Rev1
Set Password
function to change the password.
If you forget the password, press the “Reset” button in the rear panel of the Switch. The current setting
includes VLAN, Port Setting… etc. will be lost and the Switch will be restored to the default setting.
Figure 33.Set Password
Backup Setting
The backup tools help you to backup the current setting of the Switch. Once you need to backup the setting,
press the “Backup” button to save the setting.
To restore a current setting file to the device, you must specify the backup file and press the “Restore” button
to process the setting of the recorded file.
Figure 34. Backup Setting
Note: When restoring a recorded file, the current password will not be erased.