Features – NetComm NP2500 User Manual

Page 7

background image

NP2500 24-Port 10/100 PoE + 2-Port 10/100/1000 WebSMART Switch User Guide


YML842 Rev1


• 2 x 1000BASE-T Gigabit Ethernet ports

• Compliant with 802.3af specification

• Supports PoE power up to 15.4W for each PoE port

• Supports PoE power maximum 170W for the device

• Supports PoE Powered Device (PD) classification identify

• Each port supports auto MDI/MDIX, so there is no need to use cross-over cables or an up-link port

• Full-duplex transfer mode for speed of 10Mbps, 100Mbps and 1000Mbps

• Half- duplex transfer mode for speed of 10Mbps and 100Mbps

• Wire speed reception and transmission

• Store-and-Forward switching scheme capability to support rate adaptation and ensure data integrity

• Up to 4K unicast addresses entities per device, self-learning, and table aging

• 768KBytes packet buffer

• Supports IEEE 802.3x flow control for full-duplex mode ports

• Supports Back-pressure flow control for half-duplex mode ports

• Supports Port-based VLAN

• Supports Port-based Trunking

• Supports Port-mirroring

• Supports Port-setting for Speed/Disable, Flow control and Port based QoS (Quality of Service)

• Easy configuration via Web Browser

• Easy setting via Web Management Utility

• Standard 19” Rack-mount size