Netopia R5300 - Manual (Page 128)

9-28 User’s Reference Guide
■ From the NetBios Type pop-up menu, select the type of NetBIOS used on your network.
■ To ser ve DHCP clients with the NetBIOS scope, select Serve NetBios Scope and toggle it to Yes.
Select NetBios Scope and enter the scope.
■ To ser ve DHCP clients with the IP address of a NetBIOS name ser ver, select Serve NetBIOS Name Server
and toggle it to Yes.
Select NetBios Name Server IP Addr and enter the IP address for the NetBIOS name ser ver.
You are now finished setting up DHCP NetBIOS Options. To return to the IP Address Ser ving screen press
Escape.
■ To enable BootP’s address ser ving capability, select Serve BOOTP Clients and toggle to Yes.
Note: Addresses assigned through BootP are permanently allocated from the IP Address Ser ving pool until
you release them. To release these addresses, navigate back to the Main Menu, then Statistics & Logs,
Ser ved IP Addresses, and select Lease Management. Press Return.
DHCP NetBios Options
+--------+
Serve NetBios Type: +--------+
NetBios Type... | Type B |
| Type P |
Serve NetBios Scope: | Type M |
NetBios Scope: | Type H |
+--------+
Serve NetBios Name Server: No
NetBios Name Server IP Addr: 0.0.0.0
Main
Menu
Statistics Ser ved IP
& Logs Addresses
Lease Management