Line configuration for a t1 line, Line configuration for a t1 line -4 – Netopia R5300 User Manual
Page 66
8-4 User’s Reference Guide
Note: If you used Easy Setup to configure your router, you have already created a connection profile called
Easy Setup Profile. If you return to the Easy Setup menus and change the Data Link Encapsulation method
you set up in this step, the Easy Setup Data Link Encapsulation method will override this one and change
the default data link encapsulation method in use.
You are now finished configuring the Line Configuration screen. Press the Escape key to return to the WAN
Setup screen.
Note: If you selected Frame Relay as your data link encapsulation method, see
for more information.
LLL
Liiiin
n
n
nee
e
e cccco
o
o
on
n
n
nffffiiiig
g
g
gu
u
u
urrrraa
a
attttiiiio
o
o
on
n
n
n ffffo
o
o
orrrr aa
a
a TT
T
T1111 lllliiiin
n
n
nee
e
e
The T1 Line Configuration screen is where you enter the configuration parameters for your T1 line, in order for
the Netopia Router to communicate with the physical connection.
1.
Select Line Encoding and press Return. From the pop-up menu, highlight the encoding your telephone ser-
vice provider uses: B8ZS or AMI. The default setting is B8ZS. Press Return.
2.
Select Framing Mode and press Return. From the pop-up menu, highlight either ESF or D4, depending on
the framing mode that your telephone ser vice provider advises you to use. The default setting is ESF. Press
Return.
3.
If you selected ESF framing mode, toggle Transmit ANSI PRMs either No (the default) or Yes. If you
selected D4 framing mode, this option is not available.
4.
Select Number of DS0 Channels and enter the number of DS0 channels that you and your telephone
ser vice provider have determined are necessar y for your T1 line. The default setting for DS0 Channels is 1
(one). Press Return.
Note: Each DS0 channel represents a 56k or 64k increment in bandwidth. Selecting a number less than
the maximum of 24 specifies a fractional T1 inter face.
T1 Line Configuration
Line Encoding... B8ZS
Framing Mode... ESF
Transmit ANSI PRMs: No
Number of DS0 Channels: 1
First DS0 Channel: 1
Buildout (-dB)... 0-0.6
Channel Data Rate... Nx64k
Clock Source... Network
Data Link Encapsulation... Frame Relay
Enter Information supplied to you by your telephone company.