Netopia R5300 User Manual
Page 41
Setting up your Router with the SmartStart Wizard 5-9
4.
Click OK in this window and the next window. When prompted, reboot the computer.
Note: You can also use these instructions to configure other computers on your network with manual or static
IP addresses. Be sure each computer on your network has its own IP address.
Click on the DNS Configuration tab. Click Enable DNS.
Enter the following
information:
Host: Type the name
you want to give to
this computer.
Domain: Type your
domain name. If you
don't have a domain
name, type your ISP's
domain name; for
example,
netopia.com.
DNS Server Search
Order: Type the
primar y DNS IP
address given to you
by your ISP. Click
Add. Repeat this process for the secondar y DNS.
Domain Suffix Search Order: Enter the same domain
name you entered above.
3.
Click on the Gateway tab (shown below).
Under “New gateway,” enter
192.168.1.1. Click Add. This is the
Netopia R5000 Series’s pre-assigned IP
address.