Netopia R5300 - Manual (Page 169)

Monitoring Tools 12-21
IP Address: The router’s internal IP address
IPX Network Address: The router’s IPX network address, if you have it enabled and are on an IPX network
The display contains two frames, a navigation frame on the left and the information and configuration page on
the right.
The left frame permits you to navigate to:
■ System
■ Information: displays the router’s hardware (MAC) address, the model number and firmware version
currently installed, the current date and time. the router’s IP address and the IPX address, if any.
■ Connection
■ Frame Relay Statistics page on page 12-22 (for frame relay configured devices only): displays a snap-
shot of the activity for your Frame relay DLCIs.
■ Connection Status page on page 12-23 (for switched inter faces only): displays the current state of
your switched connection.
■ Connect/Disconnect page on page 12-24 (for switched inter faces only): displays a list of your connec-
tion profiles, allowing you to initiate connections using any one of them.
■ Accounting (for switched inter faces only)
If you have a leased line with an unswitched inter face, these options do not appear.
■ Router Budget Configuration page on page 12-25 : allows you to display and edit your aggregate con-
nection accounting statistics and limits.
■ Connection Budgets page on page 12-26 : allows you to set up and track three connection budgets for
cost control purposes.
■ Event Histor y
■ WAN Event Histor y page on page 12-29 : displays the most recent events that the router repor ts for
your WAN connections.
■ Device Event Histor y page on page 12-30 : displays the most recent events that the router repor ts of
its own internal activity.
If you click any link in the left frame, that page is displayed in the right frame.