Telnet client, Telnet client -6 – Netopia R5300 User Manual
Page 222
14-6 User’s Reference Guide
T
T
T
Tee
e
elllln
n
n
nee
e
etttt cccclllliiiiee
e
en
n
n
ntttt
The Telnet client mode replaces the normal menu mode. Telnet sessions can be cascaded, that is, you can
initiate a Telnet client session when using a Telnet console session. To activate the Telnet client, select Telnet
from the Utilities & Diagnostics menu.
The Telnet client screen appears.
■
Enter the host name or the IP address in dotted decimal format of the machine you want to Telnet into and
press Return.
■
Either accept the default control character “Q” used to suspend the Telnet session, or type a different one.
■
START A TELNET SESSION becomes highlighted.
■
Press Return and the Telnet session will be initiated.
■
To suspend the session, press Control-Q or whatever other control character you specified.
Two new options will appear in the Telnet screen (not shown):
Resume Suspended Session – select if you want to go back to your Telnet session
Terminate Suspended Session – select if you want to end the session
Telnet
Host Name or IP Address:
Control Character to Suspend: Q
START A TELNET SESSION
Enter the IP Address/Domain Name of a host.