Netopia R5300 - Manual (Page 57)

Easy Setup 7-7
If you chose PPP as your datalink encapsulation method, select PPP Authentication and from the pop-up
menu choose: None (the default), PAP, CHAP, PAP-TOKEN, or CACHE-TOKEN. Selecting any authentication
method other than the default None will display fields for you to enter your authentication information, such
as User Name and Password.
5. Select NEXT SCREEN and press Return. The IP Easy Setup screen appears.
Note: For more Easy Setup options, see the next section. For more Frame Relay configuration options see
“Configuring Frame Relay” on page 8-6 .
IIIIP P P P EE E Eaa a assssyyy y S S S See e ettttu u u up p p p
The IP Easy Setup screen is where you enter information about your Netopia Router’s:
■ Ethernet IP address
■ Ethernet Subnet mask
■ Domain Name
■ Domain Name Ser ver IP address
■ Default gateway IP address
Consult with your network administrator to obtain the information you will need. For more information about
setting up IP, see
“IP Setup and Network Address Translation” on page 9-1 .
1. Select Ethernet IP Address and enter the first IP address from the IP address range your ISP has given
you. This will be the Netopia Router’s IP address.
If Network Address Translation is enabled in the Easy Setup connection profile, the Ethernet IP Address
defaults to an address within a range reser ved by the Internet address administration authority for use
within private networks, 192.168.1.1.
IP Easy Setup
Ethernet IP Address: 192.168.1.1
Ethernet Subnet Mask: 255.255.255.0
Domain Name:
Primary Domain Name Server: 0.0.0.0
Default IP Gateway: 0.0.0.0
IP Address Serving: On
Number of Client IP Addresses: 100
1st Client Address: 192.168.1.100
PREVIOUS SCREEN NEXT SCREEN
Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).
Set up the basic IP & IPX attributes of your Netopia in this screen.