Netopia R5300 User Manual
Page 79
WAN and System Configuration 8-17
The PPP options screen for a switched inter face appears as follows:
You can accept the defaults, or change them if you wish. You can also specify user name and password for
both outgoing and incoming calls. the Send User Name/Password parameters are used to specify your
identity when dialing out to a remote location. The Receive User Name/Password parameters are used
when receiving dial-in clients such as via RAS configuration.
Return to the Add Connection Profile screen by pressing Escape.
Datalink (PPP/MP) Options
Data Compression... Standard LZS
Send Authentication... PAP
Send User Name:
Send Password:
Receive User Name:
Receive Password:
Maximum Packet Size: 1500
In this Screen you will configure the PPP/MP specific connection params.