Electromagnetic interference compliance – Nortel Networks 1000BASE-SX User Manual

Page 17

Advertising
background image

Electromagnetic interference compliance

17

ATTENTION

Advertencia:

Los equipos de fibra óptica pueden emitir radiaciones de láser o infrarrojas que
pueden dañar los ojos. No mire nunca en el interior de una fibra óptica ni de
un puerto de conexión. Suponga siempre que los cables de fibra óptica están
conectados a una fuente luminosa.

ATTENTION

Avvertenza:

Le apparecchiature a fibre ottiche emettono raggi laser o infrarossi che possono
risultare dannosi per gli occhi. Non guardare mai direttamente le fibre ottiche o le
porte di collegamento. Tenere in considerazione il fatto che i cavi a fibre ottiche
sono collegati a una sorgente luminosa.

CAUTION

Only qualified technicians should install this equipment.

Place all printed circuit boards on an antistatic mat until you are
ready to install them. If you do not have an antistatic mat, wear
a discharge leash to free yourself of static before touching any of
the printed circuit boards, or free yourself of static by touching a
grounded metal object before you handle a printed circuit board.

Electromagnetic interference compliance

WARNING

Use of controls or adjustments, or performance of procedures
other than those specified herein can result in hazardous radiation
exposure.

The products described in this guide meet requirements of:

FCC Part 15, Subparts A and B, Class A
EN55022: 1998/CISPR22:1997), Class A
General License VDE 0871, Class B
(AmtsblVfg No. 243/1991, Vfg 46/1992) VCCI Class A ITE
EN55024:1998/CISPR24:1997

Nortel Metro Ethernet Routing Switch 8600

Installation — SFP, XFP, GBIC, and OADM Hardware Components

NN46220-301

01.01

Standard

5.0

1 May 2008

Copyright © 2008, Nortel Networks

.

Advertising
This manual is related to the following products: