Nortel Networks 1000BASE-SX - Manual (Page 52)

52 SFP specifications
1000BASE-LX SFP specifications
The 1000BASE-LX SFP provides 1000BASE-LX Gigabit Ethernet
connectivity at 1310 nanometers (nm) using single mode (SMF) or
multimode optical fiber (MMF). The 1000BASE-LX SFP supports full-duplex
operation only. The part number for this model is AA1419015-E5.
ATTENTION
AA1419015-E5 continues to be supported. However, it is no longer orderable.
Order AA1419049-E6 as its replacement.
The following table describes standards, connectors, cabling, and distance
for the 1000BASE-LX SFP.
Table 16
IEEE 802.3z 1000BASE-LX SFP specifications
Parameter Specifications
Connectors Duplex LC
Cabling • 50 micrometer (µm) multimode fiber (MMF)
• 62.5 µm multimode fiber
• 9 µm single mode fiber (SMF)
Distance • Up to 550 meters (m) using MMF
• Up to 10 kilometers (km) using SMF
Wavelength 1310 nm
Link optical power budget 10.5 dB
Transmitter characteristics
Launch power -9.5 to 3.0 dBm
Receiver characteristics
Receiver sensitivity -20 dBm
Maximum input power -3.0 dBm
1000BASE-XD CWDM SFP specifications
The 1000Base-XD SFPs provide CWDm Gigabit Ethernet connectivity
using single-mode fiber (SMF). These SFPs support full duplex operation
only. The part numbers of the 40 km models range from AA1419025-E5 to
AA1419032-E5.
ATTENTION
AA1419025-E5 to AA1419032-E5 continue to be supported. However, they are no
longer orderable. Order AA1419053-E6 to AA1419060-E6 as their replacements.
Nortel Metro Ethernet Routing Switch 8600
Installation — SFP, XFP, GBIC, and OADM Hardware Components
NN46220-301 01.01 Standard
5.0 1 May 2008
Copyright © 2008, Nortel Networks
.