Nortel Networks 1000BASE-SX - Manual (Page 45)

45
SFP specifications
This section provides technical specifications for the supported small form
factor pluggable (SFP) models. Use this information to aid in proper network
design.
The specifications given in this section meet or exceed those specified in
the applicable IEEE standards, where they exist.
In these specifications, unless otherwise noted, receiver sensitivity is
defined as the minimum average input optical power for which the receiver
is guaranteed to meet the bit error rate (BER) of 10
-12 .
Information about SFP and XFP power consumption has been added to
Installation—Modules (NN46220-306) in a section entitled "SFPs, XFPs, R
and RC modules, and power consumption".
Navigation
• "SFP labels" (page 46)
• "General SFP specifications" (page 46)
• "100BASE-FX SFP specifications" (page 47)
• "100-Base LX SFP specifications" (page 48)
• "100-Base BX10-U/D SFP specifications" (page 48)
• "100-Base ZX SFP specifications" (page 49)
• "1000BASE-T SFP specifications" (page 50)
• "1000BASE-SX (LC) SFP specifications" (page 50)
• "1000BASE-SX (MT-RJ) SFP specifications" (page 51)
• "1000BASE-LX SFP specifications" (page 52)
• "1000BASE-XD CWDM SFP specifications" (page 52)
• "1000BASE-ZX CWDM SFP specifications" (page 53)
• "1000BASE-SX DDI SFP specifications" (page 54)
Nortel Metro Ethernet Routing Switch 8600
Installation — SFP, XFP, GBIC, and OADM Hardware Components
NN46220-301 01.01 Standard
5.0 1 May 2008
Copyright © 2008, Nortel Networks
.