Figures, Figure 1 installing an sfp – Nortel Networks 1000BASE-SX User Manual

Page 26

Advertising
background image

26

Small form factor pluggable transceivers

Procedure steps

CAUTION

SFPs are keyed to prevent incorrect insertion. If the SFP resists
pressure, do not force it; turn it over, and reinsert it.

Step

Action

1

Remove the SFP from its protective packaging.

2

Grasp the SFP between your thumb and forefinger.

3

As shown in the following figure, insert the device into the slot on
the module.

Apply a light pressure to the device until it clicks and locks into
position.

Figure 1
Installing an SFP

4

Remove the dust cover from the optical bore and insert the fiber
optic connector.

—End—

Nortel Metro Ethernet Routing Switch 8600

Installation — SFP, XFP, GBIC, and OADM Hardware Components

NN46220-301

01.01

Standard

5.0

1 May 2008

Copyright © 2008, Nortel Networks

.

Advertising
This manual is related to the following products: