Figure 2-6. multichassis configuration in max, Pxi-1 system configuration, Pxi-1 system configuration -13 – National Instruments PXI Express NI PXIe-1065 User Manual

Page 34

Advertising
background image

Chapter 2

Installation and Configuration

© National Instruments Corporation

2-13

NI PXIe-1065 User Manual

double-driving and potentially damaging trigger lines. For more
information about routing and reserving PXI triggers, refer to
KnowledgeBase 3TJDOND8 at

ni.com/support

.

The configuration steps for single or multiple-chassis systems are the same.

Figure 2-6. Multichassis Configuration in MAX

PXI-1 System Configuration

1.

Launch MAX.

2.

In the Configuration tree, click the Devices and Interfaces branch to
expand it.

3.

If the PXI system controller has not yet been configured, it is labeled
PXI System (Unidentified). Right-click this entry to display the
pop-up menu, then select the appropriate system controller model from
the Identify As submenu.

Advertising