National Instruments PXI Express NI PXIe-1065 - Manual (Page 41)

Chapter 3 Maintenance
NI PXIe-1065 User Manual 3-4 ni.com
Configuration
The fan-speed selector switch is on the rear panel of the power supply
shuttle. Refer to Figure 1-2,
Rear View of the NI PXIe-1065 Chassis ,
to locate the fan-speed selector. Select High for maximum cooling
performance (recommended) or Auto for quieter operation. Set the Inhibit
Mode switch to the Default position.
Connecting Safety Ground
Refer to the Connecting Safety Ground section of Chapter 2, Installation
and Configuration .
Connecting to Power Source
Refer to the Connecting to Power Source section of Chapter 2, Installation
and Configuration .