Pxie_sync_ctrl, Pxi star trigger, Mechanical – National Instruments PXI Express NI PXIe-1065 User Manual
Page 50
Appendix A
Specifications
© National Instruments Corporation
A-9
PXIe_SYNC_CTRL
V
IH
.......................................................... 2.0–5.5 V
V
IL
.......................................................... 0–0.8 V
PXI Star Trigger
Maximum slot-to-slot skew ................... 250 ps
Backplane characteristic impedance ...... 65
Ω ±10%
Note
For PXI slot to PXI Star mapping refer to the
section of
Chapter 1,
For other specifications refer to the PXI-1 Hardware Specification.
PXI Differential Star Triggers (PXIe-DSTARA,
PXIe-DSTARB, PXIe-DSTARC)
Maximum slot-to-slot skew ................... 150 ps
Maximum differential skew ................... 25 ps
Backplane differential impedance.......... 100
Ω ±10%
Note
For PXIe slot to PXI_DSTAR mapping refer to the
of Chapter 1,
For other specifications, the NI PXIe-1065 complies with the PXI-5 PXI Express
Hardware Specification.
Mechanical
Overall dimensions
Standard chassis
Height ...................................... 6.97 in. (177.1 mm)
Width ....................................... 18.30 in. (464.8 mm)
Depth ....................................... 18.40 in. (467.4 mm)
Note
0.57 in. (14.5 mm) is added to height when feet are installed. When tilted with front
feet extended on table top, height is increased approximately 2.08 in. (52.8 mm) in front
and 0.583 in. (14.8 mm) in rear.