Nortel Networks SRG 50 NN43001-307 - Manual (Page 109)

Configuring Bandwidth Management parameters 109
—End—
Maintenance using LD 117
Use the PRT INTRAZONE or PRT INTERZONE commands in LD 117 to
view the intrazone or interzone statistics for specified zones.
ATTENTION
Do not use the PRT ZONE command — it has been replaced by the PRT
INTRAZONE and PRT INTERZONE commands.
LD 117 Print zone statistics.
Command Description
PRT INTRAZONE [<zone>]
Print intrazone statistics for the identified zones, where:
• zone = ALL or 0-255
The output of this command displays the following information:
• Zone
• Type = PRIVATE/SHARED
• Strategy = BB/BQ
• zoneIntent = MO/VTRK/BMG
• Bandwidth = number of Kbps
• Usage = number of Kbps
• Peak = %
PRT INTERZONE [nearZone>] [<nearVPNI>] [<farZone>] [<farVPNI>]
Print interzone statistics for the specific VPNI zone; where:
• nearZone = ALL or 0-255
The output of this command displays the following information:
• Zone number = 0-255
• Zone VPNI = 1-16283
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright © 2005-2007, Nortel Networks
.