Nortel Networks SRG 50 NN43001-307 - Manual (Page 193)

Emergency Services Access 193
11 Configure ESA at the branch office.
12 Configure the branch office zone on the branch office.
The branch office zone is required for bandwidth management but
does not require ESA parameters.
13 Configure the ESN SPN on the branch office.
14 Configure the NRS for the ESA Special Number used.
15 Test ESDN using an analog (500/2500-type) telephone located at
the branch office.
16 Test ESDN using an SRG IP Phone in Normal Mode and in Local
Mode.
—End—
At the SRG, or branch office:
Step Action
1 Configure the SRG emergency trunk (CAMA or PRI).
2 Configure the Virtual Trunk at the MG 1000B.
3 Configure ESN at the branch office.
4 Configure ESA at the branch office.
5 Configure the branch office zone on the branch office.
The branch office zone is required for bandwidth management but
does not require ESA parameters.
6 Configure the ESN SPN on the branch office.
7 Configure the NRS for the ESA Special Number used.
8 Test ESDN using an analog (500/2500-type) telephone located at
the branch office.
9 Test ESDN using an SRG IP Phone in Normal Mode and in Local
Mode.
—End—
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright © 2005-2007, Nortel Networks
.