Nortel Networks SRG 50 NN43001-307 - Manual (Page 85)

Dialing plan examples 85
For more information on configuring the main office and NRS, see Branch
Office Installation and Commissioning (NN43001-314) and IP Peer
Networking Installation and Commissioning (NN43001-313). For more
information on configuring the SRG, see SRG50 Configuration Guide
(NN40140-500).
Uniform Dialing Plan
Overview
Figure 25 "UDP using location codes" (page 85) shows an example of a
Uniform Dialing Plan (UDP) using location codes (Access Code + LOC
+ DN) configuration.
In this type of dialing plan, the DNs on the SRG do not need to be different
from the BUID, since the location code (LOC) defines the unique node
characteristic. Therefore, in this example:
• The SRG IP Phone has DN 3002 and BUID 3002. (The system adds
the routing code and LOC code to the BUID).
• The local telephone has a DN of 3101.
• The main office has a telephone configured as TN 3001.
• On the main office, the AC1 steering code for the SRG is 6 and the
LOC is 504.
• On the SRG, the destination code for the main is 6 and the LOC is 501.
Figure 25
UDP using location codes
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright © 2005-2007, Nortel Networks
.