Nortel Networks SRG 50 NN43001-307 - Manual (Page 62)

62 Dialing Plan configuration
>LD 86
REQ NEW
CUST 0
FEAT DGT
DMI 18
DEL 3
Set to remove ZDP added in the main office
INST
CTYP LOC Set according to associated SPN pattern
REQ NEW
CUST 0
FEAT RLB
RLI 18
ENTR 0
LTER NO
ROUT 18
...
DMI 18
...
2 Configure ESN Special Number and Digit Manipulation.
LD 90 Configure ESN Special Number and Digit Manipulation
Prompt Response Description
REQ NEW Add new data.
CUST xx Customer number as defined in LD 15.
FEAT NET Network translation tables
TRAN Translator – Access Code 1 (NARS/BARS)
Because the call is incoming to the branch office, AC1 is
triggered if INAC = YES in the Route Data Block for the Virtual
Trunk in LD 16 and the INTL call type is associated with AC1 in
NET_DATA of the Customer Data Block in LD 15.
AC1
TYPE SPN Special code translation data block
x
…x
Special Number translation
Enter the SPN digits in groups of 3 or 4 digits, separated by a
space (for example, xxxx xxx xxxx). The SPN can be up to 19
digits long.
The maximum number of groups allowed is 5.
- FLEN (0)-24 Flexible Length
The number of digits the system expects to receive before
accessing a trunk and outpulsing these digits.
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright © 2005-2007, Nortel Networks
.