Nortel Networks SRG 50 NN43001-307 - Manual (Page 84)

84 Dialing Plan configuration
In this scenario, the WAN and the NCS are working. If the main office user
dials the SRG DN (42xx) to call the IP Phone, the call goes through.
Configuration To configure the main office:
• Configure the ESN Control Block for CDP in LD 86.
> LD 86
REQ NEW
CUST 0
FEAT ESN
CDP YES
MXSC 50
NCDP 4
DLTN YES
• Configure the CDP Distant Steering Code (DSC) in LD 87.
> LD 87
REQ NEW
CUST 0
FEAT CDP
TYPE DSC
DSC 4
FLEN 4
RLI 12
To configure the NRS (H.323 Gatekeeper/SIP Redirect Server):
• Create CDP Domain: MO_BO_CDP.
• Create H.323/SIP endpoints: MO, BO.
• Create Numbering Plan entries in CDP Domain:
— Add 4 for endpoint BO.
— Add 30 for endpoint MO.
For information about configuring H.323 Gatekeeper/SIP Redirect Server,
see IP Peer Networking Installation and Commissioning (NN43001-313).
To configure the SRG:
• Set the BUID to the same number that was assigned for the TN by the
main office.
• Set the main office VoIP Trunk Access code to 0.
• Do not assign a value to the main office trunk access code field.
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright © 2005-2007, Nortel Networks
.