Nortel Networks SRG 50 NN43001-307 User Manual

Page 92

Advertising
background image

92

Dialing Plan configuration

TYPE RDB

CUST 00

ROUT 120

DES VTRKNODE51

TKTP TIE

VTRK YES

ZONE 101

NODE 51

PCID H323

ISDN YES

MODE ISLD

DCH 12

IFC SL1

INAC YES

To configure the NRS (H.323 Gatekeeper/SIP Redirect Server):

Create H.323/SIP endpoints: MO, BO.

Create Numbering Plan entries:

— Choose type UDP-LOC.

— Add 504 for endpoint BO.

— Add 501 for endpoint MO.

For information about configuring H.323 Gatekeeper/SIP Redirect Server,
see IP Peer Networking Installation and Commissioning (NN43001-313).

To configure the SRG:

Create route and destination code to main office.

In the main office screen:

— Set the type of number to ESN LOC.

— The VoIP trunk access code field is empty.

— Set the main office Access Code Length to 1.

You can also include the LOC as the dial out when you configure the
route for the VoIP line pool. This allows users to dial fewer numbers. For
example, if 501 is configured as the dialout, and 6 is the destination
code, the user could dial 6+<main office DN>. Once the system
identifies the route (VoIP trunks) and drops the 6, it adds the LOC in
front of the DN and dials <LOC>+<DN>. In the case of redirected IP
Phones, the BUID is <destination code>+DN. The main office Access
code length, in this circumstance, is set to 1.

Dialing plan:

— Set Type to UDP.

Nortel Communication Server 1000

Main Office Configuration Guide for SRG 50

NN43001-307

02.02

Standard

Release 5.0

3 December 2007

Copyright © 2005-2007, Nortel Networks

.

Advertising