Nortel Networks SRG 50 NN43001-307 - Manual (Page 177)

Feature implementation using Command Line Interface 177
LD 117
Command Description
CHG ZALT <zone> <ALTPrefix> [<re-route all calls>]
Change ALTPrefix number for zone, where:
<zone> Input zone number (0 to 255).
Configure the branch office zone using LD 117 at the main
office.
<ALTPrefix> A digit string, of up to 7 digits, added to the start of the
dialed number, if the call will not be routed through the
WAN (due to lack of bandwidth, poor QoS, or feature is
configured for all calls).
[<re-route all calls>] Allow or Deny Alternative Call Routing for all calls, where:
• (NO) = deny
• YES = allow
LD 117
Command Description
PRT ZALT <zone>
Print the ALTPrefix assigned to a particular zone and if the feature operates for all calls from that
zone, where:
<zone> Input zone number (0 to 255).
If you do not input a zone number, the system prints the
information for all configured zones.
Sample printout
# ZALT Alternate Prefix All Calls
Alarms
Suppression
Time
10 ENL 100 YES 50
11 ENL 101 YES 0
12 DIS 102 NO 1000
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright © 2005-2007, Nortel Networks
.