Call between two local branch offices – Nortel Networks SRG 50 NN43001-307 User Manual

Page 156

Advertising
background image

156

Bandwidth Management

Region

Provisioning detail

1

All branch offices are provisioned at the NRS to route all calls
through the main office.

1

Main office sends all CDP calls to destinations that are not its
own branch office to the NRS with unchanged dialled digits.

1

Main office sends all CDP calls to destinations that are its own
branch office to the NRS with a specific gateway prefix in front of
the dialled digits.

1

All branch offices delete the prefix and terminate the calls. May
be to a local set or to a trunk.

2,3

Similar configuration, as above, applies to regions 2 and 3.

Call between two local branch offices

Figure 62 "Call flow for Scenario 3 - local call" (page 156)

shows the call

flow of a call between two local branch offices.

Figure 62
Call flow for Scenario 3 - local call

1. The branch office user dials 43456. The system transmits 43456 to the

NRS. The NRS checks its provisioning, and determines that all calls are
to be sent to the main office; it directs the call to the main office.

2. The branch office sends the call to 43456 to the main office.

3. The main office determines that this is to another branch office, with

office prefix 552. The system inserts the prefix and transmits 552-43456

Nortel Communication Server 1000

Main Office Configuration Guide for SRG 50

NN43001-307

02.02

Standard

Release 5.0

3 December 2007

Copyright © 2005-2007, Nortel Networks

.

Advertising