Nortel Networks SRG 50 NN43001-307 - Manual (Page 138)

138 Bandwidth Management
Every branch office HLOC is shared with the main office
Figure 48 "Call to a remote branch office on the originator side " (page
138)
shows the first half of the call setup (the originator side is side A). In
this example, the branch office and the main office share the same HLOC.
Figure 49 "Call to remote branch office on the destination side" (page
139)
shows the second half of the call (the terminating side is side B).
Figure 48
Call to a remote branch office on the originator side
1. The branch office user dials 6-444-3456. The system transmits
444-3456 to the NRS. The NRS checks its provisioning, and determines
that all calls are to be sent to the main office; it directs the call to the
main office.
2. The branch office sends the call to 444-3456 to the main office.
3. The main office determines that this is to another main office. The
system transmits 444-3456 to the NRS. The NRS checks its provisioning,
and determines that this call goes to main office B.
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright © 2005-2007, Nortel Networks
.