Network Technologies SM-nXm-15V-LCD - Manual (Page 23)

NTI VEEMUX VIDEO MATRIX SWITCH
19
Main Menu
The VEEMUX main menu provides control over all functions of the switch. The
administrative menu includes options not available to other users with limited privileges.
When logged in as a user other than the Administrator, only the VIDEO SWITCH, CHANGE
PASSWORD, HELP, and LOGOUT options will be available.
Figure 9- Administrator Menu
Video Switch Page
Administrative users will have full access to the Video Switch page (right) which displays the active connections
(shown in orange). The Video Switch page enables the user to control the video connections of the VEEMUX. Up
to 10 different connection configurations can be saved and later recalled by any connection method. Output
Scanning Sequences (page 24) for each output can also be enabled.
Note: If changes are made using the keypad (pg.7)
or by another user through the web interface, you
must refresh the screen using your browser to see
those changes.
Note: Configuration 0 will be automatically loaded
when the VEEMUX is powered up.
To change a connection , click on the radio button
(square image with circle in the center) that intersects
the input and output columns. A black dot will be
placed in the circle to indicate the selection. Then
press the
Submit button. The display will be reloaded
with the selections changed to orange to indicate they
are now active. Multiple connections can be changed
simultaneously.
Figure 10- Web interface Switch page
To quickly clear the selected radio buttons press the Clear Changes button. This will only work if the Submit
button has not already been pressed with the selections made.
To quickly connect all outputs to a single input , choose the desired input from the "Set all Outputs to Input" drop-
down list and press the Submit button.
Note: If radio buttons are selected in addition to using the "Set all Outputs to Input" option, the selections
made by the "Set all Outputs to Input" will take precedence when the Submit button is pressed. Selections
that conflict with it will be ignored.
Note: Scanning sequences that are enabled for an output through the web interface, either at the Video
Switch Page or at the Output Scanning Sequences page (page 24) will disable Scan Mode for that output as
configured through the LCD menu (page 8).
FYI: See page 22 for an example of using the Outputs Scanning Sequences feature.
(User Main Menu)