Materials, Cables, Default user name and passwords – Network Technologies SM-nXm-15V-LCD User Manual
Page 6
NTI VEEMUX VIDEO MATRIX SWITCH
2
Materials
Materials Supplied with this kit:
•
NTI SM-nXm-15
V-LCD Video Matrix switch
•
IEC Line cord, country specific
•
4-#10-32 x 3/4" pan head screws and 10-32 cagenuts (server cabinet mounting hardware)
•
CD with: a pdf file of this owner's manual
the NTI Discovery Tool
the NTI Switch Control Program
Cables
All cables are sold separately. The following tables list the available stocked cables with their length in feet. All VGA input and
output connectors on Matrix Switches are FEMALE. When using multi-coax high resolution VGA to BNC cables, the BNC
connectors are also FEMALE for input and output. Custom cables are available – contact NTI for pricing and distance / resolution
limitations.
NTI NAME
DESCRIPTION
VGA
VEXT-3/6/10/15/25/35/50/75/100-MM
VEXT-3/6/10/15/25/35/50/75/100
VINT-5B-6
Multi-coax high resolution VGA or SVGA video cable. Connectors are 15HD male-male
(used for INPUTS)- 3 thru 100 feet
Multi-coax high resolution VGA or SVGA video cable. Connectors are 15HD male-
female (used for OUTPUTS)-3 thru 100 feet
Multi-coax high resolution VGA to BNC cable. Connectors are 15HD male to 5 BNC’s-6
feet long
RS232
Matrix-Y-1 or see page 37 for
alternative cables
RS232 Interface Cable- Connectors are 9D male- female-female 12" long
(also see alternative cable specifications on page 37)
ETHERNET
Contact NTI for various lengths and
colors
Cat5 UTP Cable- Connectors are RJ45 male-Stocked cables are 2 thru 100 feet
Custom cables must have RJ45 connectors wired straight thru- pin 1 to pin 1, etc.
Default User Name and Passwords
The default Telnet password is
admin
(lower case letters only) . For instruction on using Telnet, see page
13.
(No username is required in order to use Telnet. You will only be prompted for a password.)
The default Web Interface user name is
Administrator
(upper case letter for "A" only).
The default Web Interface password is
admin
(lower case letters only). For instruction on using the Web
Interface, see page 18.