Safety statements, Index, Warranty information – Network Technologies SM-nXm-15V-LCD User Manual

Page 44

Advertising
background image

NTI VEEMUX VIDEO MATRIX SWITCH

40


SAFETY STATEMENTS


Grounding

These products have protective earth ground terminals and are built with full attention to consumer safety. There must be an un-
interruptible safety earth ground between the main power source and the product's power cord or supplied power cord set.
If ever the possibility exists for the grounding protection to have been reduced in any way, disconnect the power supply until the
grounding connection has been fully restored.

Servicing

NTI products are not intended to be serviced in the field and contain no user-serviceable parts. In the event repair is needed, all
servicing must be performed by factory trained and authorized service personnel. Only those items specifically identified in this
manual (if any) may be adjusted by the user of this product and adjusted only as instructed in this manual.


INDEX

add user, 22
address, 9
Autostatus, 10
bandwidth, 1
batteries, 34
baud rate, 9
Baud Rate, 8
cables, 2
change battery, 34
Device Discovery Tool, 29
dwell time, 8
edit user, 23
Ethernet connection, 5
firmware, 26, 35
front panel LCD, 7
grounding, 40
infrared remote, 30
IP address, 18, 21
IRT, 30, 31
Java, 29
LAN, 5
LED Matrix, 6
mounting in a rack, 38

N

TI Switch Control Program, 11

password, 2

resolution, 1
RS232 control, 5
RS232 Control, 8

S

can Mode-LCD, 8

S

canning Sequences, 24

Serial Address, 21
SERTEST, 11
servicing, 40

S

oftware control, 14

S

pecifications

, 39

Stored Configurations, 20

S

witch page, 19

Telnet Interface, 13
Telnet Interface-Port 2005, 14
Telnet password, 13
Telnet- Port 2000 Protocol, 13
Telnet-Port 2005 Protocol, 14
terminal, 5
unit address, 9
User management, 22
username and password, 18
video sources, 4
web browsers, 1
Web Interface, 18

WARRANTY INFORMATION


The warranty period on this product (parts and labor) is two (2) years from the date of purchase. Please contact Network
Technologies Inc at

(800) 742-8324

(800-RGB-TECH) or

(330) 562-7070

or visit our website at

http://www.networktechinc.com

for information regarding repairs and/or returns. A return authorization number is required for all repairs/returns.

Man067 Rev 4/1/13

Advertising