Network Technologies SM-nXm-15V-LCD - Manual (Page 25)

NTI VEEMUX VIDEO MATRIX SWITCH
21
Setup Pages
These settings enable the user to configure the VEEMUX web interface connection. This change will take a few
seconds and automatically redirect the user to the IP address specified.
Note: Since the webserver will be restarting all active connections will be logged out.
The Website Timeout option controls how long an inactive web connection will stay logged in.
Any change to the Website Timeout configuration takes effect immediately.
The “Telnet configuration” block enables the VEEMUX to receive commands on port 2005 in addition to port 2000.
For more on telnet use, see “Telnet Interface- Port 2000” on page 13.
Figure 11- Web interface Setup page
Figure 12- Web interface Serial Setup page
Changes to the Serial Address and Serial Speed (Fig. 11) do not require a reset and will take effect
immediately.