Introduction, Basic operation, Supported web browsers – Network Technologies SM-nXm-15V-LCD User Manual

Page 5: Compatibilty, Ordering information, Sm-nxm-15v-lcd, Options

Advertising
background image

NTI VEEMUX VIDEO MATRIX SWITCH

1

INTRODUCTION

The SM-nXm-15V-LCD (n = number of inputs (video sources), m = number of outputs (monitors)) video matrix switch (VEEMUX)
allows any of up to 32 video sources to output to any or all of up to sixteen (16) monitors. The configuration of the VEEMUX is
determined at time of order (i.e. 16x4,32x8, etc.). The bandwidth of the SM-nXm-15V-LCD is 200MHz and video resolutions
through 1900 x1200 are supported with no degradation. The switch can be controlled with the Front Panel Keypad, RS232
interface, Ethernet, or an optional Infrared Remote.

The VEEMUX can be ordered in many sizes and with several control options

.

The base unit includes a user keypad, an RS232

port, and an Ethernet port to make up a complete system. The infrared option, purchased separately, allows for maximum user
satisfaction in each unique configuration.

Basic Operation

The VEEMUX allows any source to be connected to any destination at any time with no restrictions or limitations.

Video inputs accept any RGBHV, RGBS, or RGsB signal.

Video outputs are compatible with any RGBHV or RGBS monitor, regardless of input. (RGsB monitor requires

RGsB input)

Supported Web Browsers

Most modern web browsers should be supported. The following browsers have been tested:

Microsoft Internet Explorer 6.0 or higher

Netscape 7.0 or higher

Mozilla FireFox 0.9.2 or higher

Set your browser to always check if there is a newer version of the page than the version stored in cache. This action will ensure
that it will display the most up-to-date information.

Compatibilty

The SM-nXm-15V-LCD is made to support video inputs from VGA (15HD – H & V Sync) only.

Ordering Information

The SM-nXm-15V-LCD is built to a specific size ranging from 2, 4, 8, 12, or 16 monitors and 16 or 32 video sources. The “n” in the
part number represents the number of video sources. Select a switch built for 16, or 32 video sources. The “m” in the part number
represents the number of outputs (monitors). A switch built for 2, 4, 8, 12, or 16 monitors may be ordered. It is not necessary to
fully populate all of the connectors on the unit (ex. an SM-16x8 switch has the capability of supporting 16 video sources and 8
monitors, but it is capable of operating with only 14 video sources with 7 monitors connected.

SM-nXm-15V-LCD

Replace the “n” with 16, or 32

Replace the “m” with either 2, 4 ,8,12,or 16

The following list represents the available sizes that can be ordered:

SM-16x2-15V-LCD SM-32x2-15V-LCD

SM-16x4-15V-LCD SM-32x4-15V-LCD

SM-16x8-15V-LCD SM-32x8-15V-LCD

SM-16x12-15V-LCD SM-32x16-15V-LCD

SM-16x16-15V-LCD

Options

Infrared Control (see page 30)
This feature adds the ability to control the VEEMUX via an infrared remote.
This feature is ordered by adding the suffix "-IR" to the model number when ordering (i.e. SM-4X2-15V-LCD

-IR

)






Advertising