Ricoh LD435c - Manual (Page 184)

Facsimile Features
176
4
E
If the password is programmed, enter a password using the number keys,
and then press [OK].
If you make a mistake, press [Clear] or the {Clear/Stop} key, and then try again.
F
Press [Delete].
To cancel deleting a box, press [Do not Delete]. The display returns to that of
step
D .
G
Press [Exit].
H
Press the {User Tools/Counter} key.
Programming/Changing Information Boxes
This section describes how to set up an Information Box.
You can store the following items:
• Box name (required)
Up to 20 characters long
• SEP Code (required)
Up to 20 characters long and can be composed of digits 0-9, "#", "*", and spaces
(the first character cannot be a space).
• Password (optional)
Up to 20 characters long and can be composed of digits 0-9, "#", "*", and spaces
(the first character cannot be a space).
When programming a password, a mark is displayed before the Box name.
A
Press [Facsimile Features].
B
Press [General Features].
C
Press [Box Setting].
D
Check that [Program / Change] is selected.