Ricoh LD435c - Manual (Page 207)

199
6. Scanner Features
This chapter describes user tools in the Scanner Features menu. For details on
how to access Scanner Features, see "Accessing User Tools (System Settings)".
General Settings
This section describes the user tools in the General Settings menu under Scanner
Features.
Default settings are shown in bold type.
❖ Switch Title
Select the title to be shown on the destination list.
❖ Update Delivery Server Destination List
Press [Update Delivery Server Destination List] to update the receivers from the
delivery server. To use this function, it is necessary to set [Delivery Option] to
[On]
.
❖ Search Destination
Select a destination list to be used in "Search Destination".
To search from LDAP server, it is necessary to register the LDAP server in
[System Settings]
and set [LDAP Search] to [On].
❖ TWAIN Standby Time
When the machine is being used to send e-mail or a file, or functioning as Doc-
ument Server or a network delivery scanner, a scanning request to the machine
as a TWAIN scanner will switch the machine to the network TWAIN scanner
function. This setting determines the delay until the machine switches to the
network TWAIN scanner function.
• Off
When [Off] is selected, the machine will switch to the network TWAIN
scanner function at once.
• On: 10 sec.
When [On] is selected, you can enter the delay time with the number keys
(3-30 seconds). The machine will switch to the network TWAIN scanner
function when the time set here passes after the last key operation.
❖ Destination List Display Priority 1
Select a destination list to be displayed when the machine is in the initial state.
You can select either [E-mail / Folder] or [Delivery Server].
• E-mail / Folder
• Delivery Server