Using the ip–fax destination as the sender, To change the ip-fax destination, To select the protocol – Ricoh LD435c User Manual
Page 241
Advertising
Fax Destination
233
7
G
Press [Change] under "Fax Destination".
H
Enter the new destination, and then press [OK].
I
Press [OK].
J
Press [OK].
Note
❒ To change the name, key display and title, see "Changing a Registered Name".
Reference
p.212 “Changing a Registered Name”
"Entering Text", About This Machine
Using the IP–Fax Destination as the sender
A
Press [Protection].
B
Press [Sender] under [Use Name as].
To change the IP-Fax Destination
A
Press [Change] under [Use Name as].
B
Enter the new destination, and then press [OK].
To select the protocol
A
Press [Select Line].
B
Select [H.323] or [SIP].
Advertising