Ieee 1394 (ipv4 over 1394) – Ricoh LD435c User Manual
Page 42
Connecting the Machine
34
1
Note
❒ For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed.
When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se-
lected interface takes precedence.
Reference
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using Document Server function with
an IEEE 1394 connection.
For details about how to specify the settings, see "Interface Settings".
Note
❒ [IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒ For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
Reference
Interface Settings/Network
Ethernet Speed
As required
Interface Settings/Network
LAN Type
Necessary
Interface Settings/Network
Permit SNMPv3 Communication
As required
Interface Settings/Network
Permit SSL/TLS Communication
As required
Interface Settings/Network
Host Name
As required
Menu
User Tool
Setting Requirements
Interface Settings/IEEE 1394 IPv4 Address
Necessary
Interface Settings/IEEE 1394 DDNS Configuration
As required
Interface Settings/IEEE 1394 Host Name
As required
Interface Settings/IEEE 1394 Domain Name
As required
Interface Settings/IEEE 1394 WINS Configuration
As required
Interface Settings/IEEE 1394 IPv4 over 1394
Necessary
Interface Settings/Network
IPv4 Gateway Address
As required
Interface Settings/Network
DNS Configuration
As required
Interface Settings/Network
Effective Protocol
Necessary
Menu
User Tool
Setting Requirements