Ricoh LD435c - Manual (Page 191)

Box Settings
183
4
P
Press the {User Tools/Counter} key.
Note
❒ After documents are transferred, Transfer Result Reports are not sent back
to the sender.
❒ Specify the Internet fax destination and IP-Fax destination as a reception
station.
❒ After documents are transferred, they are deleted.
❒ When this function is set to on, the machine prints out the received docu-
ments it transfers and a Transfer Result Report after the transfer has fin-
ished. If you do not want it to print, contact your service representative.
❒ When the programmed receiver is a group destination for Multi-step
Transfer, Multi-step Transfer takes place. For more information, contact
your service representative.
❒ You can edit boxes in the same way you program them.
❒ If you delete a destination specified as a reception destination using the
destination list, the settings of the reception destination are also deleted, so
they must be registered again. When a destination is changed, a document
is transmitted to the new destination. If there is no destination of the spec-
ified type, you can set which destination to be used as an alternative desti-
nation. See "Parameter Settings" (switch 32, bit 0).
Reference
p.152 “Parameter Settings”
"Entering Text", About This Machine
Deleting Transfer Boxes
This section describes how to delete Transfer Boxes.
A
Press [Facsimile Features].
B
Press [General Features].
C
Press [Box Setting].
D
Press [Delete], and then select the box you want to delete.