Connecting the telephone line, Selecting the line type – Ricoh LD435c User Manual
Page 53
Connecting the Machine to a Telephone Line and Telephone
45
1
Connecting the Machine to a Telephone
Line and Telephone
This section describes how to connect the machine to the telephone lines and se-
lect the line type.
Connecting the Telephone Line
To connect the machine to a telephone line, use a snap-in modular type connector.
Important
❒ Make sure the connector is the correct type before you start.
1.
External telephone connector
2.
G3 interface unit connector
3.
Extra G3 interface unit connector
Selecting the Line Type
Select the line type to which the machine is connected. There are two types: tone
and pulse dial.
Select the line type using Administrator Tools.
Note
❒ This function is not available in some regions.
Reference
p.135 “Select Dial / Push Phone”
AQT003S